No disponible por el momento.
No sabemos si este producto volverá a estar disponible, ni cuándo.
Elige tu dirección

Creality - Plataforma de cama de cristal templado para Ender 3, Ender 3, Ender 3, Pro/Ender 5, CR-20 Pro, impresora 3D, 235 x 235 x 3 mm

4.5 4.5 de 5 estrellas 471 calificaciones
Pagos y Seguridad
Política de devoluciones
Pagos y Seguridad
Tarjeta de Débito y Crédito
Paga con tarjetas Visa, Mastercard, American Express y Carnet.
Pago con efectivo
Compra en Amazon y paga en efectivo en tiendas participantes.
Tarjetas de Regalo Amazon
Paga con tarjetas de regalo Amazon.
Vales de Despensa
Paga con tus vales de despensa electrónicos de Sí Vale y Sodexo. Aplican restricciones.
Pago a meses
En algunos productos encontrarás la opción de pago a meses sin intereses o con costo de financiamiento.
Amazon Cash
Paga con tu saldo Amazon sin necesidad de una tarjeta bancaria.
Pago en efectivo al recoger
Paga en efectivo y recoge al mismo tiempo en una tienda de Farmacias del Ahorro. Disponible sólo en Ciudad de México.
La transacción es segura
Trabajamos duro para proteger tu seguridad y privacidad. Nuestro sistema de seguridad de pagos cifra tu información durante la transmisión. No compartimos los datos de tu tarjeta de crédito con vendedores externos ni vendemos tu información a terceros. Más información

Política de devolución

Pulsa los enlaces de categoría a continuación para acceder a los plazos de devolución y excepciones asociados (si los hay) para las devoluciones.

No disponible por el momento.
No sabemos si este producto volverá a estar disponible, ni cuándo.
  • Excelente adherencia: La superficie elaborada con carbono y silicona de Creality proporciona la mejor adherencia en el mercado. Una vez que el semillero se enfríe a temperatura ambiente, la base de silicona de carbono liberará el modelo que se puede quitar fácilmente a mano.
  • Cómodo de usar: La nueva placa de vidrio se puede colocar sobre cualquier superficie existente y se mantiene en su lugar con clips simples. Limpiar con agua o alcohol. Fácil de quitar la impresión a mano o con un raspador.
  • Alto rendimiento: A medida que el semillero se calienta a temperaturas más altas, proporciona aún más adherencia. Perfecto para esas impresiones ABS con problemas difíciles de deformación.
  • Confiabilidad: El revestimiento especial es inorgánico, con su dureza de 8 Mohs y resistencia al calor hasta 400℃.
  • Compatibilidad: Compatible con impresora 3D Creality Ender-3, Ender-3 Pro, Ender-3X.
Conoce los beneficios de la app Conoce los beneficios de la app

Detalles del producto

  • Dimensiones del paquete ‏ : ‎ 29,69 x 28,3 x 3,71 cm; 680 g
  • Producto en Amazon.com.mx desde ‏ : ‎ 14 marzo 2019
  • Fabricante ‏ : ‎ Sovol
  • ASIN ‏ : ‎ B07NVFSQGN
  • Referencia del fabricante ‏ : ‎ Glass Bed-Ender3
  • Opiniones de los clientes:
    4.5 4.5 de 5 estrellas 471 calificaciones

Descripción del producto

Nota:
Esta nueva superficie de placa de vidrio templado mejorada es increíblemente adhesiva a altas temperaturas para materiales especiales como PETG, PLA y ABS.
Cuando termine la impresión, por favor, no intentes inmediatamente tocar y quitar la materia impresa de la cama de cristal con fuerza.
Hasta que la cama de vidrio se enfríe a temperatura ambiente para que la superficie avanzada "libere" el modelo.
Cualquier comportamiento que intentes eliminar por la fuerza la materia impresa de la cama de vidrio a alta temperatura dañará la superficie de la placa y destruirá tu creación.


Ajustes de temperatura para diferentes filamentos:
1. PLA: 50-70ºC.
2. Filamento flexible: 50-70ºC.
3. ABS: 100-125ºC (se recomienda 110ºC).
4. PC: 100-130ºC (se recomienda 120ºC).
5. Nelon: 90-120ºC (se recomienda 110ºC).
6. PP: 100-130ºC (se recomienda 120ºC).
7. PETG: 50-70ºC.

Especificaciones:
Material: vidrio especial + revestimientos microporosos.
Tamaño del artículo: 235 x 235 x 4 mm.

¿Buscas información específica?

Opiniones de clientes

4.5 de 5 estrellas
4.5 de 5
471 calificaciones globales

Las mejores reseñas de México

Hay 0 reseñas y 10 calificaciones de clientes de México

Mejores reseñas de otros países

Traducir todas las opiniones al Español
Amazon Customer
5.0 de 5 estrellas Comes right off without even applying force
Revisado en Canadá el 12 de diciembre de 2021
Compra verificada
Great upgrade. It was first stick to bed with bed temperature set to 60°C for PLA. Wait it to cooldown like other comments said and it comes right off without even applying force. Adhesion is good when printing.
Reportar
Jason S
5.0 de 5 estrellas Excellent upgrade for a Creality Ender 3 (Pro) or any other 230mm x 230mm 3D printer
Reseñado en los Estados Unidos el 22 de julio de 2020
Compra verificada
The Ender 3 Pro comes with a flexible, magnetic build plate sticker, which works reasonably well for some prints but others feel like they’re welded on. Flexing the sticker usually pops them off, but that doesn’t work for small items, like the first line it prints to clear the nozzle, or little bits of support or over-extrusion. Never mind that removing the sticker usually requires re-leveling the bed. I’ve been printing 3DVerkstan PPE face shield frames the last few months, which are very tricky to get right: They’re springy so any lack of adhesion causes them to pop off mid-print, ruining the job. Even with successful prints, peeling them off the magnetic sticker cracked a few. The Ender was my first printer so I just assumed that’s how they all were.

Then I borrowed a friend’s CR10S Pro with a glass plate and was impressed with adhesion at higher temps and release after cool-down. So I ordered this item for my Ender the next day.

I was shocked. My Ender’s new plate is even better than the CR10’s. At 50-60C PLA may as well be superglued in place but once the bed cools down to room temperature, a finger flick is enough to dislodge the print, literally.

Note: my first few prints had major adhesion problems, even after cleaning the plate with 91% isopropyl alcohol until the cleaning cloth showed no more yellow. And bed leveling is even more critical with a hard surface like this than the pliable magnetic sticker. (If you don’t have a BLTouch, order one now. You won’t regret it!). That said, after I got past those first prints even PETG sticks well. Small items like calibration cubes (or calibration cats, which my daughter greatly prefers) do need blue tape, as you can see in the photo, but anything with more than a few sq in of surface area shouldn’t budge once you have everything dialed in just right.

I have to admit, I was leery of this plate considering the price and that it may not be a genuine Creality part (though it looks identical) but it’s even better than the official one. That same friend with the CR10 lent me his Ender 3 Pro, with the factory glass plate, but I prefer this one. It sticks better at high temp and releases more easily when cold.

(Yes, I have very generous friends! In this case, though, both printers needed upgrades and I offered to take care of that if I could hang on to the machines to print PPE as long as there’s a need for it. Sadly, demand for these shields shows no sign of slowing down.)
Imagen del cliente
Jason S
5.0 de 5 estrellas Excellent upgrade for a Creality Ender 3 (Pro) or any other 230mm x 230mm 3D printer
Reseñado en los Estados Unidos el 22 de julio de 2020
The Ender 3 Pro comes with a flexible, magnetic build plate sticker, which works reasonably well for some prints but others feel like they’re welded on. Flexing the sticker usually pops them off, but that doesn’t work for small items, like the first line it prints to clear the nozzle, or little bits of support or over-extrusion. Never mind that removing the sticker usually requires re-leveling the bed. I’ve been printing 3DVerkstan PPE face shield frames the last few months, which are very tricky to get right: They’re springy so any lack of adhesion causes them to pop off mid-print, ruining the job. Even with successful prints, peeling them off the magnetic sticker cracked a few. The Ender was my first printer so I just assumed that’s how they all were.

Then I borrowed a friend’s CR10S Pro with a glass plate and was impressed with adhesion at higher temps and release after cool-down. So I ordered this item for my Ender the next day.

I was shocked. My Ender’s new plate is even better than the CR10’s. At 50-60C PLA may as well be superglued in place but once the bed cools down to room temperature, a finger flick is enough to dislodge the print, literally.

Note: my first few prints had major adhesion problems, even after cleaning the plate with 91% isopropyl alcohol until the cleaning cloth showed no more yellow. And bed leveling is even more critical with a hard surface like this than the pliable magnetic sticker. (If you don’t have a BLTouch, order one now. You won’t regret it!). That said, after I got past those first prints even PETG sticks well. Small items like calibration cubes (or calibration cats, which my daughter greatly prefers) do need blue tape, as you can see in the photo, but anything with more than a few sq in of surface area shouldn’t budge once you have everything dialed in just right.

I have to admit, I was leery of this plate considering the price and that it may not be a genuine Creality part (though it looks identical) but it’s even better than the official one. That same friend with the CR10 lent me his Ender 3 Pro, with the factory glass plate, but I prefer this one. It sticks better at high temp and releases more easily when cold.

(Yes, I have very generous friends! In this case, though, both printers needed upgrades and I offered to take care of that if I could hang on to the machines to print PPE as long as there’s a need for it. Sadly, demand for these shields shows no sign of slowing down.)
Imágenes en esta reseña
Imagen del cliente
Imagen del cliente
Reportar
Zaf Sungur
5.0 de 5 estrellas Does the job it is intended to do and resistant to heat
Revisado en Canadá el 5 de junio de 2022
Compra verificada
Used for my 3D printer. Arrived on time and was exactly what I had ordered.
Reportar
Cv
5.0 de 5 estrellas Good adhesion, good leveling, good customer service
Reseñado en los Estados Unidos el 23 de junio de 2019
Compra verificada
I had high hopes for this glass plate given all the good reviews. The adhesion on this is worse than on the stock removable plastic bed cover that comes with the new ender3.

I have my bed heated to 60 degrees, nozzle to 200, and had to adjust my bed up the point where my extruder was skipping steps, grinding sounds and the nozzle printed an unremovable smear onto the plate (can't get it off even with scrubbing ) but anything less that that you can easily plop off with your finger.

So essentially either your print so close to the bed that your machine backs up and or scrapes the glass or it prints without scraping but there is no adhesion. Some people say you may use glue sticks or hairspray but whats the point of buying this thing though then. Just use the regular plate.

The product I got was different than the one pictures in the label locations. Makes me wonder if I got something different than all the good reviews

Update: I was contacted by the seller who indicated that they had an upgraded product and offered to send it to me. In addition they offered some advice regarding printing settings that may improve adhesion, which was my main concern. I will update this review completely once I receive the new product but have improved the star rating since this seller has good customer service

Update: I received a replacement by the seller. The new one looks the same as the previous one I received but comparing the two the new one has a slight bit of tackiness. The seller requested I print at 65 degrees but to get an apples to apples comparison I printed at 60 degrees bed temp which is my standard. Surprisingly the replacement held on to the object much much better. Feels about the same adhesion as using other additive products on top such as hairspray so this is very good and what I had wanted in the first place. For that reason I am updating this to 5 stars as the adhesion is good and leveling is also nice with this. Also the customer service was very good b
A 5 personas les resultó útil
 Reportar
gabe
5.0 de 5 estrellas The quality is excellent
Revisado en Canadá el 5 de marzo de 2021
Compra verificada
Really liked the product. Fit nice on my 3d printer.
Reportar